SI5350A-B05288-GMR Overview
Tape & Reel (TR)-method packaging is used for clock ICs. Embedded in the 20-VFQFN Exposed Pad package is this Clock PLL. 20 terminations can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 1.8V. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. This clock generator would require a maximum supply voltage of 1.89V. This RF synthesizer has CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. Keeping the supply voltage for this frequency synthesizer above 1.71V is recommended for safety reasons. It may cause ha85°Cards once the operating temperature for the device is set in excess of 85°C. With this clock-generating device, a high-quality clock output frequency of 200MHz can be produced. It is possible that this clock PLL will not start if the ambient temperature is less than -40°C. A frequency synthesizer with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY features better clock signal output.
SI5350A-B05288-GMR Features
Available in the 20-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5350A-B05288-GMR Applications
There are a lot of Silicon Labs SI5350A-B05288-GMR Clock Generators applications.
- Microwave radio
- Remote telemetry and instrumentation
- Aerospace and defense
- Satellite navigation communication
- Clock recovery
- Wireless infrastructure
- Tracking filters
- Motor speed controls
- Picocells, femtocells and small cells
- Vector network analyzers (VNA)
