SI5350A-B04578-GTR Overview
As a clock IC, it uses the Tape & Reel (TR) package. Clock PLL is embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. There are 10 terminations found in this file. Clock generator ics require a voltage of 1.8V. This component can be conveniently installed on the panel thanks to the Surface Mount. The maximal supply voltage (Vsup) reaches 1.89V. RF synthesizer incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC UPUs, PCs, and peripheral IC's. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 1.71V. As soon as the PLL's operating temperature exceeds 85°C, it may cause ha85°Cards. Synthesi200MHzing a clock output frequency of 200MHz is possible with this clock-generator. In temperatures lower than -40°C, this frequency generator may not start. ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY is included in this frequency generator to enhance clock signal output.
SI5350A-B04578-GTR Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5350A-B04578-GTR Applications
There are a lot of Silicon Labs SI5350A-B04578-GTR Clock Generators applications.
- Computers to manage memory cards
- Peripheral devices
- Skew suppression
- Tracking filters
- Small signal recovery
- Satellite receivers
- Wireless base station for LTE, LTE-advanced
- FPGA and processor clocks
- Test equipment
- High-frequency induction heating
