SI5350A-B04224-GTR Overview
Clock ICs are packaged using the Tape & Reel (TR) method. There is a clock generator embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. It contains a total of 10 terminations within RF synthesizer. A voltage of 1.8V should be applied to this electronic frequency generator. This component can be conveniently installed on the panel thanks to the Surface Mount. There is a maximum voltage of 1.89V for this clock generator. RF synthesizer is comprised of CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. For safety reasons, this frequency synthesizer should have a voltage supply above 1.71V. Overheating of the frequency generators may cause dangers once it is set to more than 85°C. The clock generator ic can synthesi200MHze a high-quality clock output frequency of 200MHz. If the ambient temperature is below -40°C, the frequency generator may not start. A frequency synthesizer with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY features better clock signal output.
SI5350A-B04224-GTR Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5350A-B04224-GTR Applications
There are a lot of Silicon Labs SI5350A-B04224-GTR Clock Generators applications.
- HDD recorders
- Digital logic circuits
- Clock signals to the high-speed Digital RF circuits
- Threshold extension
- MRI
- Integrated phase noise in aerospace systems
- Microprocessor clock multipliers
- Line cards used in telephone exchange
- Instrument
- Telecommunication systems
