SI5345A-D10564-GMR Overview
The Tape & Reel (TR) method is used for packaging clock ICs. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. It contains a total of 64 terminations within RF synthesizer. For this clock generator ic, a voltage of 1.8V is required. This clock generator would require a maximum supply voltage of 1.89V. The uPs/uCs/Peripheral IC clock generator incoporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. In order to maintain safety, this frequency generator should be supplied with voltages above 1.71V. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. The clock PLL can synthesi1028MHze a clock frequency of 1028MHz with high quality. Unless the ambient temperature is greater than -40°C, this clock PLL may not start.
SI5345A-D10564-GMR Features
Supply voltage of 1.8V
Output clock frequency (Max) of 1028MHz
SI5345A-D10564-GMR Applications
There are a lot of Silicon Labs SI5345A-D10564-GMR Clock Generators applications.
- Clock signals to the high-speed Digital RF circuits
- Clock recovery
- HDD recorders
- Signal demodulation
- Medical equipment
- Microwave radio
- Bit synchronization
- Phase modulation cellular systems
- Automatic control
- FPGA and processor clocks
