SI5335D-B08056-GMR Overview
The Tape & Reel (TR) method is used for packaging clock ICs. As part of the 24-VFQFN Exposed Pad package, this clock generator is embedded. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are 24 terminations found in this file. This clock generator ic should receive a voltage of 1.8V. The Surface Mount allows the electrical component to be installed conveniently on the panel. Approximately 1.98V is the maximum supply voltage needed by this time clock generator. Incorporating CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral ICs, this RF synthesizer features CLOCK GENERATOR, PROCESSOR SPECIFIC. Keeping the supply voltage for this frequency synthesizer above 1.71V is recommended for safety reasons. After the operating temperature of the frequency generators reaches 85°C, it may cause ha85°Cards. For the clock, clock generator's output frequency should not exceed 200MHz. It is possible that this clock PLL will not start if the ambient temperature is less than -40°C. In order to provide better clock signal output, this frequency synthesizer is equipped with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.
SI5335D-B08056-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335D-B08056-GMR Applications
There are a lot of Silicon Labs SI5335D-B08056-GMR Clock Generators applications.
- Computers to manage memory cards
- Remote telemetry and instrumentation
- Laptops
- Deep space exploration
- Signal frequency synthesis circuits
- FM demodulation networks for FM operations
- FPGA and processor clocks
- Mobile telephones
- Symbol synchronization
- Melting
