SI5335D-B06439-GM Overview
As a clock IC, PLLs is packaged using the Tray method. As part of the 24-VFQFN Exposed Pad package, this clock generator is embedded. This clock generator ic can sustain a maximum temperature of 260 during reflowing. 24 terminations can be found in frequency generators. This clock generator ic should receive a voltage of 1.8V. Thanks to the Surface Mount, this electric component can easily be installed on a panel. Approximately 1.98V is the maximum supply voltage needed by this time clock generator. The number of uPs/uCs/PEripheral ICs contained in this clock generator is CLOCK GENERATOR, PROCESSOR SPECIFIC. For safety reasons, this frequency synthesizer should have a voltage supply above 1.71V. The operating temperature should be kept below 85°C. For the clock, clock generator's output frequency should not exceed 200MHz. A temperature of less than -40°C may cause this clock PLL to fail to start. For better clock signal output, this clock PLL is featured with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.
SI5335D-B06439-GM Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335D-B06439-GM Applications
There are a lot of Silicon Labs SI5335D-B06439-GM Clock Generators applications.
- Aerospace and defense
- Local oscillator source in receiver
- Digital circuits
- Bluetooth receivers
- HDD recorders
- Laptops
- Closed circuit systems
- Motor speed controls
- Microwave backhaul IF
- Clock recovery
