SI5335D-B06276-GMR Overview
Tape & Reel (TR)-method packaging is used for clock ICs. Embedded in the 24-VFQFN Exposed Pad package is this Clock PLL. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are 24 terminations found in the file. Basically, a voltage of 1.8V should be applied to this electronic frequency generator. Because of the Surface Mount, clock PLL can be easily mounted on the panel. There is a maximum voltage of 1.98V for this clock generator. The uPs/uCs/Peripheral IC clock generator incoporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. The supply voltage for this frequency synthesizer should be kept above 1.71V for safety considerations. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. The clock generator ic can synthesi200MHze a high-quality clock output frequency of 200MHz. It is possible that this clock PLL will not start if the ambient temperature is less than -40°C. This frequency synthesizer features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY to produce better clock signals.
SI5335D-B06276-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335D-B06276-GMR Applications
There are a lot of Silicon Labs SI5335D-B06276-GMR Clock Generators applications.
- Microwave point-to-point systems
- Digital logic circuits
- Deep space exploration
- Coherent carrier tracking
- Microwave backhaul IF
- Automatic control system test
- Closed circuit systems
- Signal generator
- Camera systems
- Small signal recovery
