SI5335D-B05869-GM Overview
Tray-method packaging is used for clock ICs. As part of the 24-VFQFN Exposed Pad package, this clock generator is embedded. This clock generator ic can sustain 260 degrees of temperature during reflowing. 24 terminations can be found in frequency generators. This electronic frequency generator requires a voltage of 1.8V. With the Surface Mount, it is easy to install this electric component on the panel. There is a maximum voltage of 1.98V for this clock generator. This time clock generator integrates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 1.71V. Whenever the frequency generators's operating temperature exceeds 85°C, ha85°Cards may occur. With this clock-generating device, a high-quality clock output frequency of 200MHz can be produced. An ambient temperature below -40°C may cause this frequency generator to malfunction. ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY is included in this frequency generator to enhance clock signal output.
SI5335D-B05869-GM Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335D-B05869-GM Applications
There are a lot of Silicon Labs SI5335D-B05869-GM Clock Generators applications.
- Simple clock clean-up circuits
- Ports
- High-frequency induction heating
- Automatic test equipment
- Medical equipment
- Threshold extension
- Microwave radio
- Signal modulation and demodulation
- Test equipment
- Frequency Modulation (FM) stereo decoders
