SI5335D-B05761-GMR Overview
A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. The 24-VFQFN Exposed Pad package contains this clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. 24 terminations can be found in frequency generators. This time clock generator should be voltaged at 1.8V. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Clock generators can take up to 1.98V of power as a maximum supply voltageThis time clock generator integrates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. Keeping the supply voltage for this frequency synthesizer above 1.71V is recommended for safety reasons. As soon as the PLL's operating temperature exceeds 85°C, it may cause ha85°Cards. With this clock-generating device, 200MHz of high-quality clock output frequency can be generated. This frequency generator may fail to start up if the ambient temp is lower than -40°C. ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY is included in this frequency generator to enhance clock signal output.
SI5335D-B05761-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335D-B05761-GMR Applications
There are a lot of Silicon Labs SI5335D-B05761-GMR Clock Generators applications.
- Bluetooth transmitters
- Bit synchronization
- Peripheral devices
- CB radios
- Mechanical devices
- Clock recovery
- Local oscillator source in receiver
- Integrated phase noise in aerospace systems
- Microwave backhaul IF
- Reference signals to RF systems
