SI5335D-B05334-GM Overview
The Tray method is used for packaging clock ICs. Embedded in the 24-VFQFN Exposed Pad package is this Clock PLL. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. There are 24 terminations found in the file. Basically, a voltage of 1.8V should be applied to this electronic frequency generator. This component can be conveniently installed on the panel thanks to the Surface Mount. Approximately 1.98V is the maximum supply voltage needed by this time clock generator. The digital clock generator incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. Keeping the supply voltage for this frequency synthesizer above 1.71V is recommended for safety reasons. As soon as the PLL's operating temperature exceeds 85°C, it may cause ha85°Cards. With this clock-generator, you can generate a high-quality clock output frequency of 200MHz. An ambient temperature below -40°C may cause this frequency generator to malfunction. For better clock signal output, this clock PLL is featured with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.
SI5335D-B05334-GM Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335D-B05334-GM Applications
There are a lot of Silicon Labs SI5335D-B05334-GM Clock Generators applications.
- Instrument
- Local oscillators (LOs)
- Communication infrastructure
- Closed circuit systems
- Local oscillator source in receiver
- Wi-Fi routers
- Frequency Modulation (FM) stereo decoders
- Ports
- 1 Gigabit Ethernet
- Clock recovery
