SI5335D-B05329-GMR Overview
The Tape & Reel (TR) method is used for packaging clock ICs. The 24-VFQFN Exposed Pad package includes this clock generator. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 24 terminations found in this file. The clock generator ic should be grounded with a voltage of 1.8V. Surface Mount-slots make it easy to mount this electronic component on panels. Clock generators can take up to 1.98V of power as a maximum supply voltageRF synthesizer is comprised of CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. Keeping the supply voltage for this frequency synthesizer above 1.71V is recommended for safety reasons. Whenever the operating temperature for the PLL exceeds 85°C, it may become ha85°Cardous. Clock PLL synthesi200MHzes a high-quality 200MHz clock output frequency. This frequency generator may fail to start up if the ambient temp is lower than -40°C. In order to provide better clock signal output, this frequency synthesizer is equipped with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.
SI5335D-B05329-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335D-B05329-GMR Applications
There are a lot of Silicon Labs SI5335D-B05329-GMR Clock Generators applications.
- Electronic countermeasures
- Clock generation systems
- Pagers
- Telecommunication systems
- Media broadcast servers
- Radiotelephones
- MRI
- Tracking filters
- Bit synchronization
- Notebooks
