SI5335D-B04508-GM Overview
In order to package it as a clock IC, the Tray package is used. A Clock PLL is included with the 24-VFQFN Exposed Pad package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. As a result, frequency synthesizers can be found to contain 24 terminations. Basically, a voltage of 1.8V should be applied to this electronic frequency generator. Because of the Surface Mount, clock PLL can be easily mounted on the panel. It would be possible to supply this clock PLL with 1.98V of power. This time clock generator integrates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. There should be a voltage supply above 1.71V for this frequency generator in order to ensure its safety. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. The clock generator ic can synthesi200MHze a high-quality clock output frequency of 200MHz. An ambient temperature below -40°C may cause this frequency generator to malfunction. This frequency synthesizer features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY to produce better clock signals.
SI5335D-B04508-GM Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335D-B04508-GM Applications
There are a lot of Silicon Labs SI5335D-B04508-GM Clock Generators applications.
- Small signal recovery
- CPUs
- FPGA and processor clocks
- Notebooks
- Vector network analyzers (VNA)
- Jitter reduction
- Signal modulation and demodulation
- Digital switching systems
- Coherent detection of the signal
- CB radios
