SI5335D-B04460-GM Overview
It is packaged using the Tray method since it is a clock IC. There is a clock generator embedded in the 24-VFQFN Exposed Pad package. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. It contains 24 terminations that can be found in frequency synthesizer. Basically, a voltage of 1.8V should be applied to this electronic frequency generator. PLL clock is mounted in the way of Surface Mount. Approximately 1.98V is the maximum supply voltage needed by this time clock generator. The number of uPs/uCs/Peripheral IC this time clock generator incorporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 1.71V. A frequency generator that runs over 85°C may cause ha85°Cards. The clock generator ic can synthesi200MHze a high-quality clock output frequency of 200MHz. If the ambient temperature is below -40°C, the clock PLL may not start up. There is a ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY feature on this frequency generator in order to produce a better clock signal.
SI5335D-B04460-GM Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335D-B04460-GM Applications
There are a lot of Silicon Labs SI5335D-B04460-GM Clock Generators applications.
- Notebooks
- Instrument
- Mixed mode (analog and digital) applications
- Skew suppression
- Signal frequency synthesis circuits
- FM demodulation networks for FM operations
- Small signal recovery
- Mobile telephones
- PCI express cards
- Automatic test equipment
