SI5335D-B03587-GM Overview
The Tray method is used for packaging clock ICs. A Clock PLL is included with the 24-VFQFN Exposed Pad package. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. As you can see, it consists of 24 terminations. A voltage of 1.8V should be applied to this electronic frequency generator. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. It would be possible to supply this clock PLL with 1.98V of power. The uPs/uCs/Peripheral IC clock generator incoporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. A maximum voltage of 1.71V should be used for this frequency generator for safety reasons. It may cause ha85°Cards once the operating temperature for the device is set in excess of 85°C. The clock generator ic can synthesi200MHze a high-quality clock output frequency of 200MHz. A clock PLL that starts up at a lower temperature may not function. The RF synthesizer features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY for improved clock signal output.
SI5335D-B03587-GM Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335D-B03587-GM Applications
There are a lot of Silicon Labs SI5335D-B03587-GM Clock Generators applications.
- FMCW Radar
- Televisions
- Signal demodulation
- Ultrasound diagnosis
- Automatic control system test
- Skew suppression
- Satellite navigation communication
- Navigation, positioning and surveillance system for aircraft, ships and ships
- Infotainment systems
- Cell phones
