SI5335D-B02990-GMR Overview
The Tape & Reel (TR) method is used for packaging clock ICs. Clock PLL is embedded in the 24-VFQFN Exposed Pad package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. It contains 24 terminations that can be found in frequency synthesizer. This clock generator ic should receive a voltage of 1.8V. With the Surface Mount, it is easy to install this electric component on the panel. The maximal supply voltage this clock generator would take is 1.98V. This RF synthesizer has CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. Keeping the supply voltage for this frequency synthesizer above 1.71V is recommended for safety reasons. After the operating temperature of the frequency generators reaches 85°C, it may cause ha85°Cards. The clock generator ic can synthesi200MHze a high-quality clock output frequency of 200MHz. In temperatures lower than -40°C, this frequency generator may not start. With ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY, this clock generator produces better clock signals.
SI5335D-B02990-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335D-B02990-GMR Applications
There are a lot of Silicon Labs SI5335D-B02990-GMR Clock Generators applications.
- Symbol synchronization
- FPGA and processor clocks
- Radio receivers
- VSAT (Small Ground Satellite Station)
- MRI
- Automatic control system test
- FSK demodulators
- Infotainment systems
- Microwave radio
- Pulsed digital systems
