SI5335D-B02269-GM Overview
This clock IC is packaged using the Tray method. 24-VFQFN Exposed Pad contains this Clock PLL. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. 24 terminations can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 1.8V. The Surface Mount allows the electrical component to be installed conveniently on the panel. The maximum voltage this clock PLL can handle is 1.98V. The digital clock generator incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 1.71V. It may cause ha85°Cards once the operating temperature for the device is set in excess of 85°C. For the clock, clock generator's output frequency should not exceed 200MHz. If the ambient temperature is below -40°C, the frequency generator may not start. With ALSO OPERATES WITH 2.5V AND 3.3V NOMINAL SUPPLY, this clock generator produces better clock signals.
SI5335D-B02269-GM Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335D-B02269-GM Applications
There are a lot of Silicon Labs SI5335D-B02269-GM Clock Generators applications.
- Pagers
- Coherent detection of the signal
- Frequency synthesis
- Reference signals to RF systems
- Radio receivers
- Simple clock clean-up circuits
- Walkie-talkies
- Cellular/4G
- Wireless base station for LTE, LTE-advanced
- Clock recovery
