SI5335D-B01566-GMR Overview
The Tape & Reel (TR) method is used for packaging clock ICs. The 24-VFQFN Exposed Pad package contains this clock generator. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. It contains a total of 24 terminations within RF synthesizer. The clock generator ic should be grounded with a voltage of 1.8V. The Surface Mount allows the electrical component to be installed conveniently on the panel. There is a maximum voltage of 1.98V for this clock generator. This time clock generator integrates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. The supply voltage (Vsup) should be kept above 1.71V for normal operation. Whenever the frequency generators's operating temperature exceeds 85°C, ha85°Cards may occur. With this clock-generator, you can generate a high-quality clock output frequency of 200MHz. A clock PLL that starts up at a lower temperature may not function. This clock PLL features ALSO OPERATES WITH 2.5V AND 3.3V NOMINAL SUPPLY for better clock signal output.
SI5335D-B01566-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335D-B01566-GMR Applications
There are a lot of Silicon Labs SI5335D-B01566-GMR Clock Generators applications.
- Cell phones
- Phase modulation cellular systems
- Bluetooth transmitters
- Local oscillators (LOs)
- Frequency shifting decodes
- FMCW Radar
- Mixed mode (analog and digital) applications
- Microwave point-to-point systems
- Main oscillator in receiver
- VSAT (Small Ground Satellite Station)
