SI5335B-B09056-GMR Overview
Clock generator is packaged in the way of Tape & Reel (TR). The 24-VFQFN Exposed Pad package embeds this Clock PLL. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. It contains a total of 24 terminations within RF synthesizer. For this clock generator ic, a voltage of 1.8V is required. The Surface Mount allows this electrical component to be easily installed on the panel. Approximately 1.98V is the maximum supply voltage needed by this time clock generator. This RF synthesizer has CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. For safety reasons, this frequency synthesizer should have a voltage supply above 1.71V. As soon as the PLL's operating temperature exceeds 85°C, it may cause ha85°Cards. Synthesi200MHzing a clock output frequency of 200MHz is possible with this clock-generator. Unless the ambient temperature is greater than -40°C, this clock PLL may not start. ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY is included in this frequency generator to enhance clock signal output.
SI5335B-B09056-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335B-B09056-GMR Applications
There are a lot of Silicon Labs SI5335B-B09056-GMR Clock Generators applications.
- Radio receivers
- FMCW Radar
- Antenna automatic tracking
- Microwave backhaul IF
- Frequency shifting decodes
- Bit synchronization
- Radiotelephones
- Carrier synchronization in wired communication
- Wireless base station for LTE, LTE-advanced
- Frequency synthesis
