SI5335B-B08300-GMR Overview
As a clock IC, it uses the Tape & Reel (TR) package. The 24-VFQFN Exposed Pad package embeds this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. In it, there are 24 terminations to be found. The clock generator ic should be grounded with a voltage of 1.8V. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. It would take a maximum supply voltage of 1.98V to operate this time clock generator. This time clock generator integrates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. For safety reasons, this frequency generator's supply voltage should remain above 1.71V. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. With this clock-generator, you can generate a high-quality clock output frequency of 200MHz. In temperatures lower than -40°C, this frequency generator may not start. The RF synthesizer features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY for improved clock signal output.
SI5335B-B08300-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335B-B08300-GMR Applications
There are a lot of Silicon Labs SI5335B-B08300-GMR Clock Generators applications.
- Frequency synthesis
- Tracking filters
- Microwave radio
- Coherent carrier tracking
- Cell phones
- Main oscillator in receiver
- Mixed mode (analog and digital) applications
- Motor speed controls
- Radio receivers
- Signal generator
