SI5335B-B07290-GM Overview
It is packaged using the Tray method since it is a clock IC. The 24-VFQFN Exposed Pad package embeds this Clock PLL. This clock generator ic can sustain a maximum temperature of 260 during reflowing. 24 terminations can be found in frequency generators. To operate this time clock generator, 1.8V voltage should be applied. Because of the Surface Mount, clock PLL can be easily mounted on the panel. It would be possible to supply this clock PLL with 1.98V of power. There are CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral ICs integrated into this digital clock generator. For safety reasons, this frequency generator's supply voltage should remain above 1.71V. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. For the clock, clock generator's output frequency should not exceed 200MHz. If the ambient temperature is below -40°C, the frequency generator may not start. A frequency synthesizer with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY features better clock signal output.
SI5335B-B07290-GM Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335B-B07290-GM Applications
There are a lot of Silicon Labs SI5335B-B07290-GM Clock Generators applications.
- Wide area power system
- Carrier synchronization in wired communication
- 10 Gigabit Ethernet
- DVD recorders
- Line cards used in telephone exchange
- Deep space exploration
- Coherent detection of the signal
- Signal frequency synthesis circuits
- Various decoding circuits
- Test equipment
