SI5335B-B05907-GM Overview
As a clock IC, it uses the Tray package. In the 24-VFQFN Exposed Pad package, there is an embedded clock generator. This clock generator will sustain a maximum temperature of 260 when reflown. There are 24 terminations found in this file. Clock generator ics require a voltage of 1.8V. The Surface Mount allows this electrical component to be easily installed on the panel. Approximately 1.98V is the maximum supply voltage needed by this time clock generator. CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/peripheral ICs are incorporated in this digital clock generator. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 1.71V. If the frequency generator's operating temperature exceeds 85°C, it may pose a ha85°Card. Clock PLL synthesi200MHzes a high-quality 200MHz clock output frequency. If the ambient temperature is below -40°C, the frequency generator may not start. For better clock signal output, this clock PLL is featured with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.
SI5335B-B05907-GM Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335B-B05907-GM Applications
There are a lot of Silicon Labs SI5335B-B05907-GM Clock Generators applications.
- Microprocessor clock multipliers
- Electronic equipment
- PCI express cards
- Closed circuit systems
- Ultrasound diagnosis
- Satellite navigation communication
- Bluetooth receivers
- Digital HDTV systems
- Mobile telephones
- Radar
