SI5335B-B03146-GM Overview
The Tray method is used for packaging clock ICs. 24-VFQFN Exposed Pad contains this Clock PLL. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. As a result, frequency synthesizers can be found to contain 24 terminations. A voltage of 1.8V should be applied to this electronic frequency generator. Surface Mount-slots make it easy to mount this electronic component on panels. It would be possible to supply this clock PLL with 1.98V of power. The uPs/uCs/Peripheral IC clock generator incoporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. There should be a voltage supply above 1.71V for this frequency generator in order to ensure its safety. A frequency generator that runs over 85°C may cause ha85°Cards. With this clock-generator, you can generate a high-quality clock output frequency of 200MHz. Unless the ambient temperature is greater than -40°C, this clock PLL may not start. This clock PLL features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY for better clock signal output.
SI5335B-B03146-GM Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335B-B03146-GM Applications
There are a lot of Silicon Labs SI5335B-B03146-GM Clock Generators applications.
- Clock recovery
- FSK demodulators
- Frequency Modulation (FM) stereo decoders
- Aerospace and defense
- Local oscillators (LOs)
- CB radios
- High-speed optical transport network (OTN)
- Mobile telephones
- Sampling clocks for ADC and DAC
- Digital switching systems
