SI5335A-B08725-GMR Overview
As a clock IC, it is packaged by the Tape & Reel (TR) method. A Clock PLL is included with the 24-VFQFN Exposed Pad package. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. In it, there are 24 terminations to be found. The clock generator ic should be grounded with a voltage of 1.8V. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. Approximately 1.98V is the maximum supply voltage needed by this time clock generator. The number of uPs/uCs/PEripheral ICs contained in this clock generator is CLOCK GENERATOR, PROCESSOR SPECIFIC. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 1.71V. A frequency generator that runs over 85°C may cause ha85°Cards. With this clock-generating device, 350MHz of high-quality clock output frequency can be generated. If the ambient temperature is below -40°C, the clock PLL may not start up. ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY can also be founded when using frequency generators.
SI5335A-B08725-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz
SI5335A-B08725-GMR Applications
There are a lot of Silicon Labs SI5335A-B08725-GMR Clock Generators applications.
- Televisions
- Digital circuits
- Ports
- Camera systems
- CB radios
- Mechanical devices
- Small signal recovery
- PMR (Professional Mobile Radio)
- Ultrasound diagnosis
- Peripheral devices
