SI5335A-B08206-GM Overview
The Tray method is used for packaging clock ICs. Clock PLL is embedded in the 24-VFQFN Exposed Pad package. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are a total of 24 terminations in this file. A voltage of 1.8V should be applied to this electronic frequency generator. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. The maximum voltage this clock PLL can handle is 1.98V. RF synthesizer incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC UPUs, PCs, and peripheral IC's. For safety reasons, this frequency generator's supply voltage should remain above 1.71V. If the frequency generator's operating temperature exceeds 85°C, it may pose a ha85°Card. With this clock-generating device, a high-quality clock output frequency of 350MHz can be produced. This frequency generator may fail to start up if the ambient temp is lower than -40°C. ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY can also be founded when using frequency generators.
SI5335A-B08206-GM Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz
SI5335A-B08206-GM Applications
There are a lot of Silicon Labs SI5335A-B08206-GM Clock Generators applications.
- Carrier synchronization in wired communication
- Automatic control
- Quenching?
- Test equipment
- Threshold extension
- Microwave point-to-point systems
- Signal demodulation
- Cable television converter boxes
- Bluetooth transmitters
- Frequency synthesis
