SI5335A-B08180-GMR Overview
As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. In the 24-VFQFN Exposed Pad package, there is an embedded clock generator. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. There are a total of 24 terminations in this file. Clock generator ics require a voltage of 1.8V. Surface Mount-slots make it easy to mount this electronic component on panels. It would be possible to supply this clock PLL with 1.98V of power. There are CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral ICs integrated into this digital clock generator. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 1.71V. The operating temperature should be kept below 85°C. Synthesi350MHzing a clock output frequency of 350MHz is possible with this clock-generator. If the ambient temperature is below -40°C, the frequency generator may not start. There is a ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY feature on this frequency generator in order to produce a better clock signal.
SI5335A-B08180-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz
SI5335A-B08180-GMR Applications
There are a lot of Silicon Labs SI5335A-B08180-GMR Clock Generators applications.
- Bit synchronization
- Phase modulation cellular systems
- Camera systems
- Bluetooth transmitters
- Automatic control
- Skew suppression
- Cellular/4G
- Antenna automatic tracking
- High-frequency induction heating
- Melting
