SI5335A-B07500-GM Overview
Clock generator is packaged in the way of Tray. Clock PLL is embedded in the 24-VFQFN Exposed Pad package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. There are 24 terminations found in the file. This time clock generator should be voltaged at 1.8V. The Surface Mount allows this electrical component to be easily installed on the panel. Approximately 1.98V is the maximum supply voltage needed by this time clock generator. There are CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral ICs integrated into this digital clock generator. It is safe to use this frequency synthesizer with a supply voltage above 1.71V. Overheating of the frequency generators may cause dangers once it is set to more than 85°C. For the clock, clock generator's output frequency should not exceed 350MHz. A clock PLL that starts up at a lower temperature may not function. This frequency synthesizer features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY to produce better clock signals.
SI5335A-B07500-GM Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz
SI5335A-B07500-GM Applications
There are a lot of Silicon Labs SI5335A-B07500-GM Clock Generators applications.
- Fiber Channel
- Pagers
- Pulsed digital systems
- Aerospace and defense
- Wide area power system
- Signal demodulation
- Signal analyzer
- Electronic countermeasures
- VSAT (Small Ground Satellite Station)
- Carrier synchronization in wired communication
