SI5335A-B07427-GM Overview
The Tray method is used for packaging clock ICs. This clock generator is embedded in the 24-VFQFN Exposed Pad package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. 24 terminations can be found in frequency generators. The clock generator ic should be grounded with a voltage of 1.8V. The Surface Mount allows the electrical component to be installed conveniently on the panel. Approximately 1.98V is the maximum supply voltage needed by this time clock generator. There are CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral ICs integrated into this digital clock generator. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 1.71V. Whenever the operating temperature for the PLL exceeds 85°C, it may become ha85°Cardous. The clock PLL can synthesi350MHze a clock frequency of 350MHz with high quality. In temperatures lower than -40°C, this frequency generator may not start. This frequency synthesizer features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY to produce better clock signals.
SI5335A-B07427-GM Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz
SI5335A-B07427-GM Applications
There are a lot of Silicon Labs SI5335A-B07427-GM Clock Generators applications.
- PCI express cards
- Phase modulation cellular systems
- Wi-Fi routers
- Quenching?
- Test and instrumentation equipment
- FPGA and processor clocks
- Integrated phase noise in aerospace systems
- Frequency shifting decodes
- DVD recorders
- Microprocessor clock multipliers
