SI5335A-B06194-GMR Overview
A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. The 24-VFQFN Exposed Pad package contains this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. As you can see, it consists of 24 terminations. Basically, a voltage of 1.8V should be applied to this electronic frequency generator. Thanks to the Surface Mount, this electric component can easily be installed on a panel. It would be possible to supply this clock PLL with 1.98V of power. This RF synthesizer has CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. For safety reasons, this frequency generator's supply voltage should remain above 1.71V. The operating temperature should be kept below 85°C. With this clock-generator, you can generate a high-quality clock output frequency of 350MHz. This frequency generator may fail to start up if the ambient temp is lower than -40°C. This frequency synthesizer features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY to produce better clock signals.
SI5335A-B06194-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz
SI5335A-B06194-GMR Applications
There are a lot of Silicon Labs SI5335A-B06194-GMR Clock Generators applications.
- Bluetooth transmitters
- PCI express cards
- Signal frequency synthesis circuits
- HDD recorders
- Instrument
- Automatic test equipment
- Precision auxiliary angle deflection measurement
- Signal modulation and demodulation
- Skew suppression
- Carrier synchronization in wired communication
