SI5335A-B04655-GMR Overview
Tape & Reel (TR)-method packaging is used for clock ICs. The 24-VFQFN Exposed Pad package contains this clock generator. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. 24 terminations can be found in frequency synthesizer. For this clock generator ic, a voltage of 1.8V is required. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. The maximal supply voltage this clock generator would take is 1.98V. The number of uPs/uCs/Peripheral IC this time clock generator incorporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. A maximum voltage of 1.71V should be used for this frequency generator for safety reasons. After the operating temperature of the frequency generators reaches 85°C, it may cause ha85°Cards. The clock PLL can synthesi350MHze a clock frequency of 350MHz with high quality. If the ambient temperature is below -40°C, the clock PLL may not start up. For better clock signal output, this clock PLL is featured with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.
SI5335A-B04655-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz
SI5335A-B04655-GMR Applications
There are a lot of Silicon Labs SI5335A-B04655-GMR Clock Generators applications.
- Bit synchronization
- Clock signals to the high-speed Digital RF circuits
- Phase modulation cellular systems
- Pulsed digital systems
- Pagers
- Local oscillator source in receiver
- Small signal recovery
- DVD add-on cards for multimedia PCs
- Simple clock clean-up circuits
- Microwave point-to-point systems
