SC600DIMLTRT Overview
As a result of its 10-VFDFN Exposed Pad package, it helps to save board space on the board. The LED driver's design uses 1 outputs.Surface Mount represents this mounting method.It is highly performing and reliable when it emerges as a DC DC Regulator.-40°C~150°C TJ is a valid operating temperature for the led driver.Backlight has many advantages.In the 650kHz frequency range, it operates.It operates with 10 terminations.The configuration of the board is built around 10 pins.Undetermined failures may occur if the voltage supply falls below 2.5V.Surface Mount is mounted on it.You can find this LED driver under the base part number SC600.6.5V is an acceptable voltage.The output voltage of the device is 5V.10 pins are available on the device.Moreover, it can be classified as Power Management Circuits due to its characteristics.There is no current available to supply to the load.LED drivers belonging to the mAhXLife? series are used in a wide variety of applications.Device operation requires 3.7V volts from the circuit.Operation is greatly facilitated when the input voltage exceeds or equals 2.5V.
SC600DIMLTRT Features
Available in the 10-VFDFN Exposed Pad package
Operating temperature of -40°C~150°C TJ
Frequency of 650kHz
SC600DIMLTRT Applications
There are a lot of Semtech Corporation SC600DIMLTRT LED Driver ICs applications.
- Replacement lamps
- Stage and Studio lighting
- Down lighting
- Industrial LED Lighting: Image Recognition Devices
- Architectural lighting
- LED headlights
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Stage Lighting and Signage
- Scanners and Handy Terminals
- Flicker-free LED Lighting using R1580N
