DAP202KT146 Overview
In operation, this device will be set to 1.2V volts forward.The maximum output voltage can be set to 0.1A.Maintaining a surge current under 4A and not letting it exceed it is the key to preventing it.In this case, the forward voltage has to be set at 100mA to operate the device.This part can draw 100mA current.Typical devices like this one are powered by reverse voltage peaks of 100nA.A semiconductor device's maximum reverse leakage current is 100nA, which is the current created by its reverse bias.This electronic or electrical device creates 200mW of heat (energy loss) as a derivative of its primary action.In this electronic or electrical device, the maximum amount of 200mW heat is generated (energy is wasted).
DAP202KT146 Features
1.2V forward voltage
a maximum output voltage of 0.1A
a peak voltage of 100nA
a reverse voltage peak of 100nA
DAP202KT146 Applications
There are a lot of ROHM Semiconductor DAP202KT146 applications of rectifier diode array.
- General Rectification
- Rectifier for drives applications
- Crowbar applications
- Battery chargers
- Free wheeling diode in low voltage converters
- Rectifiers in switch mode power supplies (SMPS)
- Rectifiers for UBS
