BU7262SFVM-TR Overview
Op amp is packaged in 8-VSSOP, 8-MSOP (0.110, 2.80mm Width) case. A General Purpose-type buffer amplifier is shown here. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. A total of 8 pins are located on this board. This linear amplifier should be powered by an 3V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. A total of 8 pins are present on the instrumentation amplifier. Regarding input offset voltage, op amp rates 9mV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~105°C . An 550μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. On the buffer amps, there are 2 channels that can be used. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 2.75V voltage. TAPE AND REEL is adopted to pack the instrumentation amplifier.
BU7262SFVM-TR Features
8 Pins
supply voltage of 3V
95dB voltage gain
Output Type: Rail-to-Rail
BU7262SFVM-TR Applications
There are a lot of ROHM Semiconductor BU7262SFVM-TR Instrumentational OP Amps applications.
- RF cable systems
- Home audio systems
- E-book readers
- Measurements of Wheatstone bridge
- Fission chambers
- High/low-pass filter circuit
- Weighing systems
- Power transmission
- Communication
- Thermocouples
