BU7252SF-E2 Overview
A convenient transport package is provided in 8-SOIC (0.173, 4.40mm Width) .The comparator has a Push-Pull output.The part will be shipped by Tape & Reel (TR) .There are 8 terminals on the comparator.The electrical component in this case belongs to the Comparator families.A comparator is capable of completing a variety of demanding tasks when supplied with 3V voltage.Electronic comparator is possible to classify the chip as General Purpose .In total, it contains 2 elements.As a result, it contains 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~105°C to prevent malfunctions.The comparator is equipped with 8 pins.Search BU7252 to find more pin-to-pin solutions.There is a quiescent current of 65μA in this comparator.The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current be 35μA in order to use the device normally.In order to run the device, there are only 3V power supplies required.A maximum current of 1pA can be supplied to the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 90dB .The normal operation of the system requires 2.75V operating voltage.
BU7252SF-E2 Features
Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~105°C
Quiescent Current: 65μA
Voltage Gain: 90dB
BU7252SF-E2 Applications
There are a lot of ROHM Semiconductor
BU7252SF-E2 linear comparators applications.
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
