BU7242SFVM-TR Overview
In order to protect the op amps, a 8-VSSOP, 8-MSOP (0.110, 2.80mm Width) case is used. There are two types of operational amplifiers in this circuit. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. A total of 8 pins are located on this board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are located on the operational amplifiers. Regarding input offset voltage, op amp rates 9mV. Surface Mount is the recommended mounting type of operational amplifiers. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~105°C . The buffer amplifier is capable of operating from a supply current of 180μA . 95dB should remain the voltage gain. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. According to the specifications of the buffer op amp, the operating supply voltage is rated at 2. The operating supply voltage of the buffer op amp is rated at 2.75V. TAPE AND REEL is adopted to pack the instrumentation amplifier.
BU7242SFVM-TR Features
8 Pins
supply voltage of 3V
95dB voltage gain
Output Type: Rail-to-Rail
BU7242SFVM-TR Applications
There are a lot of ROHM Semiconductor BU7242SFVM-TR Instrumentational OP Amps applications.
- High/low-pass filter circuit
- Signal transformation
- Television
- earphone
- pH (acidity)
- Fission chambers
- Communication
- Image computer boards
- Automotive sensors
- Oscilloscopes
