BU4941FVE-TR Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Tape & Reel (TR)-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. In this IC management you will find SOT-665 functions for you to refer to. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In a 2.4V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. The mount is provided by Surface Mount. This power ic can be sub-categorized as Power Management Circuits. There are a total of 5 pins on power management. Power managment ic pin count is 5. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 700mV, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 7V volts. The recommended mounting type is Surface Mount. Temperature setting for the supervisors should be -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. For this power management, there is an 550nA volt supply current. A similar IC managements number of the manufacturer can always be found by using BU4941, the base power ics number. Voltage supervisor can work with a supply temperature of 1.58μA at the most.
BU4941FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current
BU4941FVE-TR Applications
There are a lot of ROHM Semiconductor BU4941FVE-TR Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- External alarm
- Set top box
- Important electronics for automotive protection
- Efficient information transmission
- emergency room
- FPGA design
- Smartphones
- Power communication system
- Multi-voltage system
