Name: BU4927G-TR
Brand: ROHM Semiconductor
SKU: BU4927G-TR
Price: 0.57000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	20 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SC-74A, SOT-753
Number of Pins	5
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2009
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Subcategory	Power Management Circuits
Max Power Dissipation	540mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	2.4V
Base Part Number	BU4927
Output	Push-Pull, Totem Pole
Pin Count	5
Number of Channels	1
Max Supply Voltage	7V
Min Supply Voltage	900mV
Operating Supply Current	550nA
Max Supply Current	1.23μA
Adjustable Threshold	NO
Accuracy	1 %
Watchdog Timer	No
Reset	Active High/Active Low
Voltage - Threshold	2.7V
Number of Voltages Monitored	1
Min Reset Threshold Voltage	2.673V
Max Reset Threshold Voltage	2.727V
Threshold Voltage	+2.7V
Length	2.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

BU4927G-TR Product Details

BU4927G-TR Overview

There are 5 terminals on this power management that allow it to be mounted. A Tape & Reel (TR) package is used to package the power management. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. Please refer to power management for SC-74A, SOT-753 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. In a 2.4V supply voltage, the power management conducts. When 1 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. A total of 5 pins are located on this power management. Power managment ic pin count is 5. A voltage (Vsup) that doesn't fall below 900mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 7V volts of supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 550nA. You can always use BU4927, the base supervisor number, to search for similar PMICs of the manufacturer. Voltage supervisor can work with a supply temperature of 1.23μA at the most.