BU4918FVE-TR Overview
It is mounted through 5 terminals on the power management. Power management is packaged in a Tape & Reel (TR) way. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find SOT-665 functions for your reference. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. During operation, the power ic is supplied with a voltage of 2.4V. Power ics operate at 1 supply voltages. By Surface Mount, IC management has been mounted. This power ic can be sub-categorized as Power Management Circuits. 5 pins are present in total in this power management. This power management system has 5 pins. A voltage (Vsup) that doesn't fall below 700mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 7V volts of supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 550nA is the recommended value. You can always use BU4918, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature that PMIC chip can work with is 1.05μA.
BU4918FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current
BU4918FVE-TR Applications
There are a lot of ROHM Semiconductor BU4918FVE-TR Voltage Supervisors applications.
- Important electronics for automotive protection
- Computer applications
- Analog circuit
- Set top box
- Network equipment
- DSP
- Detection of phase loss
- Data storage applications
- Solar power charger
- WiFi router
