BU4913G-TR Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. There is a Tape & Reel (TR)-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. When a supply voltage of 2.4V is applied to the power ic, it conducts. Power ics operate at 1 supply voltages. Power management is included in the Surface Mount mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 5. 5 pins make up the power management. Supply voltage (Vsup) should be at least 700mV for this power management. This IC power should be powered by no more than 7V volts of supply voltage (Vsup). A Surface Mount mounting type is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 550nA is the recommended value. It is always advisable to use BU4913, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature that PMIC chip can work with is 880nA.
BU4913G-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current
BU4913G-TR Applications
There are a lot of ROHM Semiconductor BU4913G-TR Voltage Supervisors applications.
- Analog circuit
- Detection of phase sequence
- emergency room
- Radar
- Household appliances
- Consumer electronics
- Precision measurement
- Urban rail transit weak current power monitoring
- Power distribution systems of ICU
- Sensitive sensors
