BU4912G-TR Overview
A total of 5 terminals are used to mount this power management. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to this PMIC for 1 functions. Power management consists of 1 channels, each of which can be used independently. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. The supervisor is always powered by a 2.4V volt supply. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts power management on the wall. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 5 pins on the board. This power management has 5 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than -300mV. The maximum supply voltage (Vsup) is not to exceed 7V volts in this IC management. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to -40°C~125°C TA degrees. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. You can always use BU49*, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature voltage supervisor can handle is 880nA.
BU4912G-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of -300mV
BU4912G-TR Applications
There are a lot of ROHM Semiconductor BU4912G-TR Voltage Supervisors applications.
- Detection of phase imbalance
- Detection of phase loss
- Efficient information transmission
- Battery-powered equipment
- Household appliances
- Military communications
- Microcontroller system
- Telecommunications equipment
- Magnetic resonance imaging
- Electronics installed in the vehicle
