BU4847G-TR Overview
This power management consists of 5 mounting terminals on which it can be mounted. It is packaged with Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. In a 2.4V supply voltage, the power management conducts. Power ics operate at 1 supply voltages. Power management is included in the Surface Mount mount. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 5 pins in it. 5 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 700mV. There should be no more than 7V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. As far as the supply current of the power management is concerned, it is 550nA. For similar manage ics search of the manufacturer, you can always refer to BU4847, the base PMIC number. A maximum supply temperature of 1.75μA can be used.
BU4847G-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current
BU4847G-TR Applications
There are a lot of ROHM Semiconductor BU4847G-TR Voltage Supervisors applications.
- Battery-powered equipment
- Radio
- DSP
- Power distribution systems of infant care room
- Radar
- Transformer load monitoring equipment
- Set top box
- Functional modules
- Electric heating appliances
- Power distribution systems of CCU
