BU4846FVE-TR Overview
There are 5 terminals connected to this power management, which makes it easy to mount. It is packaged with Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. The purpose of this IC power is to provide you with a reference of SOT-665 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. When a supply voltage of 2.4V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. The power management is mounted by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 5 pins on power management. There are 5 pins on the power managment ic. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 700mV. Voltage (Vsup) shouldn't exceed 7V volts in this PMIC. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The power management's supply current is 550nA. A similar IC managements number of the manufacturer can always be found by using BU4846, the base power ics number. The maximum supply temperature voltage supervisor can handle is 1.75μA.
BU4846FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current
BU4846FVE-TR Applications
There are a lot of ROHM Semiconductor BU4846FVE-TR Voltage Supervisors applications.
- emergency room
- Computer applications
- Detection of phase loss
- Leakage protection
- Leakage current detection
- Dash board
- Network equipment
- Electric heating appliances
- Urban rail transit weak current power monitoring
- Personal computers
