BU4845FVE-TR Overview
A total of 5 terminals are used to mount this power management. There is a Tape & Reel (TR)-packaging method applied to IC management. For your reference, this IC power includes a list of 1 functions. There are 1 channels on this power managment ic that can be found in a series. To assist you, this PMIC includes SOT-665 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 2.4V. IC management is possible to find a succession of 1 voltages that have been checked. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 5 pins on IC management. 5 pins make up the power management. In order for this IC power to function, the supply voltage (Vsup) cannot be less than -300mV. During this IC power, the maximum supply voltage (Vsup) should not exceed 7V volts. Power management recommends the Surface Mount mounting type. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. You can always use BU48*, the base supervisor number, to search for similar PMICs of the manufacturer. At the most, voltage supervisor can work with a supply temperature of 1.75μA.
BU4845FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of -300mV
BU4845FVE-TR Applications
There are a lot of ROHM Semiconductor BU4845FVE-TR Voltage Supervisors applications.
- Leakage current detection
- Dash board
- Utility meter
- Power distribution systems of operating room
- Detection of phase imbalance
- Detection of phase sequence
- emergency room
- Precision measurement
- Urban rail transit weak current power monitoring
- Radio
