BU4843F-TR Overview
There are 4 terminals on this power management that allow it to be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SC-82 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Manage ics operate at 2.4V supply voltages. During operation, the power ic is supplied with a voltage of 1. By Surface Mount, IC management has been mounted. The power management system can be categorized as a Power Management Circuits chip. Power management has a total of 4 pins. The pins of the power management system count 4. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 900mV volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 7V volts. The recommended mounting type for IC management is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. During operation, this power management system outputs Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 550nA. If you want to search for similar IC managements of this manufacturer, you can always refer to BU4843, which is the base power ics number. It is necessary to have 2.5/5V volts of power in order for this voltage supervisor to operate. At the most, voltage supervisor can work with a supply temperature of 1.75μA.
BU4843F-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 900mV
550nA operating supply current
BU4843F-TR Applications
There are a lot of ROHM Semiconductor BU4843F-TR Voltage Supervisors applications.
- Multi-voltage system
- Battery cars
- Detection of phase loss
- Power communication system
- Radar
- Unattended substation automation
- Electrical fire monitoring system
- Network equipment
- Detection of phase sequence
- Leakage current detection
