BU4842FVE-TR Overview
As you can see, this power management is mounted through 5 terminals. It is packaged with Tape & Reel (TR). To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. As a reference, this IC power includes SOT-665 functions for your convenience. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. IC management conducts in a 2.4V-voltage supply. A supply voltage of 1 is used to conduct the PMIC chip. Power management is included in the Surface Mount mount. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 5 pins on the board. The pins of the power management system count 5. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 700mV. This IC power should be powered by no more than 7V volts of supply voltage (Vsup). Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~125°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. The supervisor's supply current is specified to 550nA. You can always use BU4842, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 1.58μA can be used.
BU4842FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current
BU4842FVE-TR Applications
There are a lot of ROHM Semiconductor BU4842FVE-TR Voltage Supervisors applications.
- Radio
- Set top box
- Military communications
- Electronics installed in the vehicle
- Network equipment
- DSP
- Satellite navigation
- Detection of phase sequence
- Radar
- Solar power charger
