BU4841F-TR Overview
As you can see, this power management is mounted through 4 terminals. Tape & Reel (TR)-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of SC-82 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. When a supply voltage of 2.4V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Surface Mount. This power ic can be sub-categorized as Power Management Circuits. In total, the power management has 4 pins in it. There are 4 pins on the supervisor. IC management can only work with a supply voltage of 700mV volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 7V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 550nA is the recommended value. A similar IC managements number of the manufacturer can always be found by using BU4841, the base power ics number. This power management requires 2.5/5V power to work. The maximum supply temperature voltage supervisor can handle is 1.58μA.
BU4841F-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current
BU4841F-TR Applications
There are a lot of ROHM Semiconductor BU4841F-TR Voltage Supervisors applications.
- Embedded computing
- Smartphones
- Leakage protection
- Multi-voltage system
- Computer applications
- Data storage applications
- Detection of phase sequence
- Personal computers
- Electronics installed in the vehicle
- DVR
