BU4839FVE-TR Overview
As you can see, this power management is mounted through 5 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. For your reference, this IC power includes a list of 1 functions. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of SOT-665 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. When a supply voltage of 2.4V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by a Surface Mount-axis. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 5 pins on the board. 5 pins make up the power management. Supply voltage (Vsup) should be at least 700mV for this power management. The supply voltage (Vsup) should not exceed 7V volts in this IC power. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: -40°C~125°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. Supplied with a operating current of 550nA, this PMIC is capable of fully function as specified. It is always advisable to use BU4839, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature is 1.58μA.
BU4839FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current
BU4839FVE-TR Applications
There are a lot of ROHM Semiconductor BU4839FVE-TR Voltage Supervisors applications.
- Leakage protection
- Functional modules
- Kitchen appliances
- Detection of phase loss
- Efficient information transmission
- Radio
- Power distribution systems of ICU
- Microprocessor system
- Digitally controlled LDO regulators circuit
- Electronics installed in the vehicle
