BU4829G-TR Overview
It is mounted through 5 terminals on the power management. Packaging is in the form of a Tape & Reel (TR). Please refer to this PMIC for 1 functions. Power management consists of 1 channels, each of which can be used independently. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. When 2.4V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. This power ic can be sub-categorized as Power Management Circuits. Power management has a total of 5 pins. Pin count of the power management is 5. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than -300mV volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 7V volts. The recommended mounting type is Surface Mount. Temperature setting for the supervisors should be -40°C~125°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. It is always advisable to use BU48*, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature is 1.4μA. As IC management of the measurement and testing process, a nominal tolerance of 1% should be noted.
BU4829G-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of -300mV
BU4829G-TR Applications
There are a lot of ROHM Semiconductor BU4829G-TR Voltage Supervisors applications.
- Military electronics
- Digitally controlled LDO regulators circuit
- Dash board
- Telecommunications equipment
- Satellite navigation
- Leakage protection
- Detection of phase sequence
- DVR
- Kitchen appliances
- Rechargeable batteries
