BU4827FVE-TR Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. In terms of packaging, power management follows the Tape & Reel (TR) model. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes SOT-665 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. A supply voltage of 2.4V is used to conduct the PMIC chip. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by a Surface Mount-axis. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. A total of 5 pins are located on this power management. Power managment ic pin count is 5. IC management can only work with a supply voltage of 900mV volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 7V volts. In this case, Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. There is a 550nA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using BU48*, the base power ics number. A maximum supply temperature of 1.23μA can be used with this power management.
BU4827FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 900mV
550nA operating supply current
BU4827FVE-TR Applications
There are a lot of ROHM Semiconductor BU4827FVE-TR Voltage Supervisors applications.
- Refrigeration
- Electronics installed in the vehicle
- Dash board
- Satellite navigation
- Cloud computing
- Digitally controlled LDO regulators circuit
- Analog circuit
- Military communications
- DSP
- Sensitive sensors
