BU4822FVE-TR Overview
This power management consists of 5 mounting terminals on which it can be mounted. Packaging is in the form of a Tape & Reel (TR). Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for SOT-665 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. A supply voltage of 2.4V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. This power ic can be sub-categorized as Power Management Circuits. Power management has a total of 5 pins. 5 pins make up the power management. IC management can only work with a supply voltage of 700mV volts. There should be no more than 7V volts of supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. Supplied with a operating current of 550nA, this PMIC is capable of fully function as specified. The maximum supply temperature is 1.23μA.
BU4822FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current
BU4822FVE-TR Applications
There are a lot of ROHM Semiconductor BU4822FVE-TR Voltage Supervisors applications.
- Functional modules
- Dash board
- Digitally controlled LDO regulators circuit
- Efficient information transmission
- Power communication system
- Personal computers
- Urban rail transit weak current power monitoring
- emergency room
- WiFi router
- Electronics installed in the vehicle
