BU4348FVE-TR Overview
It is mounted through 5 terminals on the power management. In terms of packaging, power management follows the Tape & Reel (TR) model. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. Please find attached SOT-665 functions for your reference in this IC power. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. A supply voltage of 2.4V is used to conduct the PMIC chip. IC management conducts in a 1-voltage supply. By Surface Mount, IC management has been mounted. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 5 pins on power management. 5 pins are present on the power management system. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 700mV, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 7V volts. Surface Mount mounting is recommended. This range of temperature should be set for the supervisors: -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. You can always use BU43*, the base supervisor number, to search for similar PMICs of the manufacturer. The power management can work with a maximum supply temperature of 1.75μA.
BU4348FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
BU4348FVE-TR Applications
There are a lot of ROHM Semiconductor BU4348FVE-TR Voltage Supervisors applications.
- Computer applications
- DSP
- Transformer load monitoring equipment
- Detection of phase loss
- Power distribution systems of operating room
- Radio
- Urban rail transit weak current power monitoring
- Microprocessor system
- Data storage applications
- Precision measurement
